Quick Answer: How Do You Set Fence Posts At The Same Height?

Will wooden posts rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts.

With pressure-treated posts, the rot will be slow.

The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base..

Should I use 4×4 or 6×6 fence posts?

Instead of 4×4 posts, go with 6×6 posts. The extra size makes a huge difference. It’s a smart place to invest a little extra in your fence, because if your posts distort after they have been set in the ground with concrete, they are extremely difficult to replace.

What is the best concrete mix for fence posts?

In terms of the ratio to use for a concreting fence posts, the best mix is a mix of 1:2:4 (1 cement, 2 sand, 4 aggregate). Concrete is always best mixed using a cement mixer to ensure it’s even, but if you only need to mix a little, hand mixing is ok (see mixing concrete project above for tips on how to do this).

How many bags of cement do I need for a fence post?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

Is 1 ft deep enough for fence post?

You should always bury one-third of your fence post underground. … This means that unless you are building a 2-foot fence, which is unlikely in any garden, a 1-foot hole will not be deep enough to support your post. For main and gateposts, you should dig the holes an additional 6 inches deep.

Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

Should I use concrete for fence posts?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.

How do you build a fence without a sinking post?

If you need a temporary fence or a border that you can move as needed, a quick way is to use concrete blocks. Attach a bracket to a concrete block that is heavy enough to hold the wood or other material you plan to use to build the fence. The posts can be mounted to the brackets and the fence finished from there.

How do I make my fence posts the same height?

The way to do that is to drill your holes (3 feet to 3–1/2 feet deep in most applications) and use longer posts. You then determine the height you want where the ground is highest and use a string line and a level to mark all of the posts to the same height. Then you cut post off to that height.

How tall do fence posts need to be?

As a general rule of thumb, you’ll need to place at least 1/3 the height of the post in the ground. For example, a 6-foot tall fence will need at least 2 feet of post in the ground.

What size Post do you use for a 6 foot fence?

The depth of the post hole needs to be 1/3 to 1/2 the height of your fence. For example, if you are building a fence that’s 6 feet tall, you will need a hole that is at least 2 feet deep. That also means that you’d need to use an 8-foot post.

How do you keep fence posts from rotting in concrete?

If you don’t allow the concrete to wick moisture out to its surrounding dirt, it will rot your posts quick. I think the best way to do posts is to use just gravel, no concrete. Tamp every 6 inches and you could get it as solid as concrete and this would keep you posts as dry as possible.

How deep should a 10 foot fence post be?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.

How long will a treated 4×4 post last in the ground?

The Forest Products Laboratory and other research groups have shown that treated wood stakes placed in the ground for more than 40 years remain rot-free. But young pressure-treated decks, many less than 10 years old, are being shoveled into landfills.

Can fence posts be 12 feet apart?

You should space your posts 8-12 feet apart as a general rule, although 10-12 feet apart is sufficient for 5-6 wire barbed fence.